Pilot V6-3.5L (2004)
Map Light: Testing and Inspection
Front Individual Map Lights Test
Front Individual Map Light Test
1. Turn the light switch OFF.
2. Carefully pry off the lens (A) with a small screwdriver.
3. Remove the four mounting screws.
4. Disconnect the 3P connector (B) from the housing (C).
5. Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 3 terminals with the switch ON.
-
There should be continuity between the No. 1 and No. 2 terminals with the switch OFF.
6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light.