Pilot V6-3.5L (2004)
Fuel Pressure: Testing and Inspection
Fuel Pressure Test
Special Tools Required
-
Fuel pressure gauge 07406-004000A
-
Fuel pressure gauge attachment O7VAJ-0040100
1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.
2. Disconnect the negative cable from the battery.
3. Remove the fuel fill cap.
4. Remove the intake manifold cover.
5. Place a wrench on the fuel pulsation damper (A).
6. Place a rag or shop towel (B) over the fuel pulsation damper.
7. Slowly loosen the fuel pulsation damper one complete turn.
8. Remove the fuel pulsation damper from its fitting, and attach the fuel pressure gauge attachment.
9. Attach the fuel pressure gauge.
10. Reconnect the negative battery cable, then start the engine, and let it idle.
