Pilot V6-3.5L (2004)
11. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 12.
12. With the door multiplex control unit still disconnected, make these input tests at the connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 13.
NOTE: For the terminals A4, A5, A10, A11, and A14, refer to the power window control unit input test.
