Pilot V6-3.5L (2004)
Side Air Bag: Service and Repair
Side Airbag
Spring-Loaded Lock Connector
Spring-loaded Lock Connector
Some SRS system connectors have a spring-loaded lock.
Side Airbag Connector:
Disconnecting
To release the lock, pull the spring-loaded sleeve (A) and the slider (B) while holding the opposite half of the connector. Then pull the connector halves
apart. Be sure to pull on the sleeve and not on the connector half.
Connecting
Hold both connector halves, and press them firmly together until the projection (C) of the sleeve-side connector clicks.
Removal and Installation
Side Airbag Replacement
NOTE: Review the seat replacement procedure in the Body section before doing repairs or service.
Removal
1. Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.
