Pilot V6-3.5L (2004)
5. Remove the seat belt switch harness (A):
-
Manual seat with height: Adjust the seat cushion to its maximum height, and remove the harness.
-
8-way power seat and manual seat without height: Remove the seat cushion mounting bolts (B) from the seat linkage (C), then lift the seat
cushion halfway from the seat linkage, and remove the harness.
6. Install the buckle in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolt before reinstallation.
-
Assemble the washers and collar on the center anchor bolt as shown.
-
Move the seat up and down to make sure the buckle harness is not pinched.
