Pilot V6-3.5L (2004)
Seat Heater Switch: Testing and Inspection
Switch Test
All '03 models and '04 driver's switch and '04 passenger's switch without navigation system
1. Remove the center lower cover.
2. Disconnect the 6P connector (A) from each seat heater switch (B), and remove the switch.
3. Check for continuity between the terminal in each switch position according the table.
4. If the continuity is not as specified, replace the switch.
5. If any of the illumination bulbs (C) is blown, replace it.
'04 passenger's switch with navigation system
1. Remove the center lower cover.
2. Disconnect the 8P connector (A) from the front passenger's seat heater switch (B), and remove the switch.
