Pilot V6-3.5L (2004)
5. Loosen the locknut (A), then remove the rack guide screw (B).
6. Remove the spring (C) and the rack guide (D) from the gearbox.
7. Remove the cylinder lines from the gearbox.
8. Drain the fluid from the cylinder fittings by slowly moving the steering rack back and forth.
9. Loosen the 16 mm flare nut (A), and remove the return line joint (B).
10. Remove the two flange bolts, then remove the valve body unit (C) from the gearbox (D).
