Pilot V6-35L (2004) Steering and Suspension: Front Suspension Spring Service and Repair
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear
Spring/Bump Stop Replacement
Removal
1. Raise the rear of the vehicle, and make sure it is securely supported. Remove the rear wheels.
2. Place a floor jack at the connecting point of lower arm B and the knuckle.
3. Remove the flange nut (C) while holding the joint pin (D) with a hex wrench (E), and disconnect the stabilizer link (F) from lower arm B.
4. Remove the three flange bolts (A) and the wheel sensor harness (C) from lower arm B. Do not disconnect the wheel sensor connector.