Pilot V6-3.5L (2004)
Shift Cable: Service and Repair
Shift Cable Replacement
Shift Cable Replacement
SRS components are located in this area. Review the SRS components locations, precautions, and procedures in the SRS section before performing
repairs or service.
1. Raise the front of the vehicle, and make sure it is securely supported.
2. Set the parking brake, and block the rear wheels securely.
3. Remove the steering column upper and lower covers.
4. Shift the transmission into the [N] position.
5. Remove the cable end nut (A), then separate the shift cable (B) from the shift lever.
6. Rotate the socket holder (C) on the shift cable a quarter turn; the tab (D) on the socket holder will be in the opening (E) of the shift cable bracket
(F). Then slide the holder to remove the shift cable from the shift cable bracket.
7. Remove the shift cable guide bracket (A) and grommet (B).
