Pilot V6-3.5L (2004)
7. Install the stabilizer link (A) to the damper (B).
8. Install a new spindle nut (A), then tighten the nut. After tightening, use a drift to stake the spindle nut shoulder (B) against the driveshaft.
9. Clean the mating surfaces of the brake disc and the front wheel, then install the front wheel with the wheel nuts.
10. Refill the transmission with recommended fluid.
11. Check the front wheel alignment, and adjust it if necessary.
Intermediate Shaft Removal
Intermediate Shaft Removal
1. Drain the transmission fluid.
2. Remove the right driveshaft.
3. Remove the flange bolt (A) and the two dowel bolts (B).
4. Remove the intermediate shaft (C) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent damage
to the differential oil seal (D).
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
