Pilot V6-3.5L (2004)
^
Driver 07749-0010000
^
Support base attachment 07LAF-SM40300
^
Support base 07965-SD90100
^
Attachment, 42 x 47 mm 07746-0010300
1. Remove the heat shield (A) and intermediate shaft outer seal (B) from the bearing support (C).
2. Remove the set ring (D) and the external snap ring (E).
3. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using the special tools and a press. Be careful not to damage the metal
rings (C) on the intermediate shaft during disassembly.
4. Remove the internal snap ring.