Pilot V6-3.5L (2004)
7. With the driver's multiplex control unit still disconnected, make these input tests at the driver's under-dash fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 8.
8. With the driver's multiplex control unit still disconnected, make these input tests at the driver's under-dash fuse/relay box socket.
9. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box and connect fuse/relay box socket terminal A12 to
battery voltage. This turns the power window relay on.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 10.
Door Unit
10. Remove the door multiplex control unit from the driver's door, and disconnect its connectors.
