Pilot 2WD V6-3.5L (2006)
Driver/Vehicle Information Display: Testing and Inspection
Electrical Compass Unit Input Test
Electrical Compass Unit Input Test
1. Disconnect the 7P connector (A) from the electrical compass (B).
2. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 3.
3. Reconnect the connector and, make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the electrical compass unit must be faulty; replace it.
