Pilot 2WD V6-3.5L (2006)
Remote Switch: Testing and Inspection
Radio Remote Switch Test/Replacement
EX and EXL
1. Remove the driver's airbag assembly.
2. Remove the two screws and the cover (A) from the steering wheel.
3. Remove the two screws from the radio remote switch (B).
4. Disconnect the 4P connector from the radio remote switch.
5. Measure the resistance between the No. 3 and No. 4 (with navigation system) or No.1 (without navigation system) terminals in each switch
position according to the table.
6. If the resistance is not as specified, replace the remote switch.
