Pilot 2WD V6-3.5L (2006)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Removal/Installation - Tailgate Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim in the sequence shown. To remove the tailgate trim panel, remove the cargo area light.
-
Tailgate upper trim
-
Left tailgate side trim
-
Right tailgate side trim
-
Tailgate handle
-
Tailgate trim panel
2. Install the trim in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips, hooks, and tabs into place securely.
