Pilot 2WD V6-3.5L (2006)
Drink Holders: Service and Repair
Second Row Seat Beverage Holder/ Tray Replacement
NOTE: Take care not to tear the seams or damage the seat covers.
1. Detach the clips of the beverage holder/tray panel (A), then pull the panel upward to release the hooks (B) and remove it.
2. Using a T30 TORX bit, remove the screws, then remove the beverage holder/tray (A).
3. Detach the clips, and release the front hooks (A), then remove the beverage holder/tray (B).
4. Install the beverage holder/tray in the reverse order of removal, and check if the clips are damaged or stress-whitened, and if necessary, replace
them with new ones.
