Pilot 2WD V6-3.5L (2006)
9. Before installing the B-pillar upper trim (A), carefully remove the clip (B).
10. Check the overlap between the headliner and B-pillar upper trim, and if necessary, adjust it.
11. Carefully reinstall the upper clip (A) to the B-pillar upper trim (B). Be sure that the grommet (C) is nearest to the top of the pin (D) as shown.
12. Reinstall the B-pillar upper trim (A).
1. Insert the upper of the trim into the headliner (B).
2. Place the trim over the B-pillar (C), and fit its clip (D) and hooks (E) into holes (F) in the B-pillar, then lightly push the trim into place.
NOTE:
-
Make sure the side curtain airbag isn't tucked down under the clips and ribs.
