Pilot 2WD V6-3.5L (2006)
-
Rear door opening trim, as needed
-
Rear side trim panel, upper portion as needed
2. Remove the upper anchor cap (A), and remove the upper anchor bolt (B).
3. Hit the upper clip in the C-pillar trim (A) with a rubber mallet. The clip is under the "SIDE CURTAIN AIRBAG-mark (B). Hitting the clip breaks
the projections (C) on the pin (D) and pushes it into the grommet (E) and against the body (F). The grommet becomes narrow.
NOTE: The clip must be replaced with a new when the C-pillar trim is reinstalled.
