honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trim Removal/Installation - Cargo Areas|Page 7737 > < Trim Removal/Installation - Cargo Areas|Page 7735
Page 16
background image

10. Reinstall the D-pillar trim (A). Place the trim over the D-pillar (B), and fit its upper clip (C) and lower clips (D) into holes (E) in the D-pillar, then

lightly push the trim into place.
-

Make sure the side curtain airbag isn't tucked down under the clips and ribs.

-

Push lightly on the upper clip. If you push too hard, the clip will be damaged, and it will not hold the trim properly.

11. Reinstall the rear door opening seal.

Trim Removal/Installation - Cargo Areas|Page 7737 > < Trim Removal/Installation - Cargo Areas|Page 7735