Pilot 2WD V6-3.5L (2006)
-2 Sand the surface evenly, particularly the area that was filled.
Use a flexible block and #120#180 sandpaper
-3 Featheredge the paint coat.
Sand the body filler surface until the proper dimensions are met.
Use the double action sander and #240~#320 #400 disc paper.
3. Air blowing / decreasing
Use alcohol, and wax and grease remover.
Also, clean and degrease the surfaces where masking tape will be attached.
Undercoating
Undercoating
1. Masking
Mask the area surrounding the damage to prevent over spray from the primer surfacer.
Use masking tape and paper.
