honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Drain Channel Replacement|Page 7975 > < Body - Gap Between Moonroof Visor and Roof|Page 7970
Page 1
background image

Sunroof / Moonroof Drain: Service and Repair
Drain Channel Replacement

Drain Channel Replacement 

1. Fully close the moonroof, then place it in the full tilt-up position,
2. Remove the glass.

3. Disconnect the rod clips (A), then remove the drain channel rods (B) on both sides.

4. Slide the drain channel (A) forward.

5. Pull the rear edge of the drain channel (A) up while pushing both clips (B), and release the channel from both hooks (C) of the drain channel slider

by pulling it rearward.

6. Remove the drain channel.
7. Install the channel in the reverse order of removal, and note these items:

-

Push the clip portions into place securely.

-

Full close the moonroof and check the glass height adjustment.

Drain Channel Replacement|Page 7975 > < Body - Gap Between Moonroof Visor and Roof|Page 7970