Pilot 2WD V6-3.5L (2006)
Sunroof / Moonroof Drain: Service and Repair
Frame and Drain Tube Replacement
Frame and Drain Tube Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Remove these items:
-
Headliner
-
Moonroof glass
2. Remove the moonroof frame (A). Put on gloves to protect your hands.
1. Disconnect the motor connector (B), open/close-tilt/close switch connector (C), and the drain tubes (D), and remove the moonroof relays (E).
2. Detach the clips (F).
3. With an assistant holding the frame, remove the bolts (G) starting at the rear, and release the rear hooks (H) by moving the frame forward, then
remove the frame.
4. With the help of an assistant, carefully remove the frame through the front door opening. Take care not to damage the interior trim, body, or
seat covers.
3. To remove a front drain valve (A) from the body, remove the kick panel, left or right. Tie a string to the end of the front drain tube (B) then pull
the drain tube down out of the A-pillar.
