Pilot 2WD V6-3.5L (2006)
1.
Open the moonroof. Crumple two shop towels, then insert them between the roof panel and the air spoiler.
2.
Remove the four screws and four nuts that hold the moonroof visor to the front brackets and the side brackets.
3.
Remove the two side brackets, and replace them with the new side brackets.
NOTE:
Place the side brackets on the protective tape, and secure them with a piece of masking tape.
4.
Set the moonroof visor on the roof in front of the moonroof opening, and adjust its position so the holes in the visor are aligned with the front
bracket holes. Loosely install the two front screws and nuts.
5.
Insert the two screws through the moonroof visor and side brackets, then loosely install the nuts.