Pilot 2WD V6-3.5L (2006)
5. Release the hook strips (A), hooks (B, C), and inside springs (D), then loosen the seat-back cover (E).
6. Pull back the edge of the seat-back cover all the way around. Release the clips (A) from under the seat-back cover (B), then remove the seat-back
cover.
7. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners,
hooks and inside springs.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
-
Use only original Honda replacement seat-back covers.
-
Replace the back panel clips with new ones.
Seat Cushion Cover
1. Remove the front seat.
2. Remove the seat cushion, driver's 8-way power, driver's manual height adjustable, passenger's manual.