Pilot 2WD V6-3.5L (2006)
6. Pull back the edge of the seat cushion cover (A) all the way around, release all of the clips (B), and release the fastener (C) under the right seat
cushion cover, then remove the seat cushion cover.
7. Install the seat cushion cover in the reverse order of removal, and note these items:
-
To prevent wrinkles, make sure the material is stretched evenly over the pad before securing all the clips.
-
Replace all of the clips fastening the seat-back cover (A) and pad wire (B) with new ones (C) using commercially available upholstery ring
pliers (D).
