Pilot 2WD V6-3.5L (2006)
Seat Latch: Service and Repair
Second Row Seat-Back Recline Lever Replacement
Second Row Seat-back Recline Lever Replacement
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Take care not to bend the cables.
1. Slide the second row seat forward fully.
2. Left second row seat: Remove the left second row seat belt center anchor bolts.
3. Remove the pivot bolt cover. Using a T30 Torx bit, remove the pivot bolt from both sides, left second row seat, right second row seat
4. Remove the third row seat access trim and back cover then release the clips from behind the seat-back, as necessary.
5. Left second row seat: Lift the seat cushion up, and remove the outer bracket cover and inner bracket cover.
6. Right second row seat: Lift the seat cushion up, and remove the outer bracket cover.
7. Return the second row seat-back, and fold down the seat-back.
8. Pry out the lid (A), and remove the screws securing the recline lever (B).
9. Left second row seat: Remove the clip (A) securing the inner recline cable (B), release the clips (C), then remove the inner recline cable and outer
recline cable (D) from both brackets.
