Pilot 2WD V6-3.5L (2006)
Seat Latch: Service and Repair
Third Row Seat-Back Recline Lever Replacement
Third Row Seat-back Recline Lever Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
*
Available through the American Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend the seat-back recline cable.
-
Put on gloves to protect your hands.
1. Remove the left third row seat or right third row seat.
2. Remove the seat-back.
3. Pry out the lid (A), and remove the screws securing the third row seat-back recline lever (B).
4. Remove the back cover, then release the clips from behind the seat-back, as necessary.
5. Remove the screw and release the hook (A), then remove the outer bracket cover (B).