Pilot 2WD V6-3.5L (2006)
Parking Brake Shoe: Service and Repair
Parking Brake Shoe Lining Break-In
Parking Brake Shoe Lining Break-in
NOTE: Do the brake linings surface break-in when replacing shoes with new brake linings and/or new rear drum/disc.
WARNING: Do this in a safe area.
1. Park the vehicle on a firm, level surface.
2. Do the major parking brake adjustment.
3. Do the minor parking brake adjustment.
4. Press the parking brake pedal 2 to 4 clicks.
5. Drive the vehicle for 400 m (1/4 mile) at no more than 31 mph (50 km/h).
6. Stop the vehicle and release the parking brake for 5 - 10 minutes to allow the drum in the brake disc/drum to cool.
7. Repeat steps 4 through 6 three more times.
8. Check the parking brake pedal adjustment.
