Pilot 2WD V6-3.5L (2006)
Water Pump: Testing and Inspection
Water Pump Inspection
1. Remove the timing belt:
-
J35A9 engine
-
J35Z1 engine
2. Turn the water pump pulley counterclockwise. Check that it turns freely. If it doesn't turn smoothly, replace the water pump.
NOTE: When you check the water pump pulley, you may see a small amount of weeping from the bleed holes (A). This is normal.
3. Install the timing belt:
-
J35A9 engine
-
J35Z1 engine