honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Engine Controls - Engine Noise in VCM Mode/MIL ON/DTC's|Page 1995 > < Engine Controls - Engine Noise in VCM Mode/MIL ON/DTC's|Page 1989
Page 1
background image

Rocker Arm Assembly: All Technical Service Bulletins
Engine Controls - Engine Noise in VCM Mode/MIL ON/DTC's

07-070

October 23, 2007

Applies To: 
2006 Pilot 2WD - ALL
2007 Pilot 2WD - From VIN 5FNYF2...7B000001 thru 5FNYF2...7B040535

Engine Taps/Raps Loudly When Going Into VCM Mode, or the MIL Comes On With DTC(s) P0301 Thru P0306

SYMPTOM

When the engine goes into VCM mode, it makes a loud tapping or rapping noise. In addition, the MIL may come on with DTC P0301, P0302, P0303,
P0304, P0305, or P0306 (No. 1 thru No. 6 cylinder misfire detected).

PROBABLE CAUSE

One or more of the rear bank VCM rocker arm pins are sticking.

CORRECTIVE ACTION

Replace the intake and exhaust rocker arms and all related parts listed in this service bulletin.

PARTS INFORMATION

TOOL INFORMATION

VCM Air Regulator:

P/N 07AAJ-PNAA100, H/C 7114408 

VCM Air Regulator Adapter:

P/N 07AAJ-RYPA100, H/C 8645392

REQUIRED MATERIALS

Hondabond HT Silicone Gasket

(One tube is enough for about 20 vehicles):

P/N 08718-0001, H/C 2963817

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

110179

Flat Rate Time:

5.0 hours

Engine Controls - Engine Noise in VCM Mode/MIL ON/DTC's|Page 1995 > < Engine Controls - Engine Noise in VCM Mode/MIL ON/DTC's|Page 1989