Pilot 2WD V6-3.5L (2006)
Rocker Arm Assembly: Service and Repair
Rocker Arm and Shaft Disassembly/Reassembly
Rocker Arm and Shaft Disassembly/Reassembly
FRONT
NOTE:
-
Identify parts as they are removed so they can be reinstalled in their original locations.
-
Inspect the rocker shafts and rocker arms.
-
Rocker arms must be installed in the same positions if reused.
-
When removing or installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and rocker
arms on the shaft.
-
Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
REAR