Pilot 2WD V6-3.5L (2006)
12.
Slide each new intake rocker arm onto the rocker shaft bridge. Make sure the tappet side of each arm faces up.
13.
Carefully slide the intake shaft into the bridge and through each rocker arm. You may need to move the arms up or down to allow the shaft to slide
in.
NOTE:
To avoid binding or damaging the arms, do not force the shaft into the bridge.
14.
Using the instructions in steps 12 and 13, install the new exhaust rocker arms and the exhaust rocker shaft.
15.
Line up the rocker shafts with their oil passages facing inward.
