Pilot 2WD V6-3.5L (2006)
Valve Cover: Service and Repair
Cylinder Head Cover Removal
Cylinder Head Cover Removal
FRONT
1. Remove the intake manifold.
2. Remove the three ignition coils from the front cylinder head.
3. Remove the two bolts (A) securing the harness holder, and remove the dipstick (B).
4. Remove the front cylinder head cover.
REAR
1. Remove the intake manifold.
2. Remove the three ignition coils from the rear cylinder head.
3. Disconnect the three injector connectors, rocker arm oil control solenoid connector, and rocker arm oil pressure switch connector from the rear
cylinder head.