Pilot 2WD V6-3.5L (2006)
10. Screw the battery clamp bolt in as shown to hold the timing belt adjuster. Tighten it by hand; do not use a wrench.
11. Loosely install the idler pulley with a new idler pulley bolt so the pulley can move but does not come off.
12. Install the timing belt in a counterclockwise sequence starting with the drive pulley.
-
1 Drive pulley (A)
-
2 Idler pulley (B)
-
3 Front camshaft pulley (C)
-
4 Water pump pulley (D)
-
5 Rear camshaft pulley (E)
-
6 Adjusting pulley (F)
13. Tighten the idler pulley bolt.