Honda Workshop Service and Repair Manuals > Pilot 2WD V6-3.5L (2006) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Filter | Component Information

Variable Valve Timing Pressure Switch > < Timing Cover|Specifications

Page 1

Variable Valve Timing Filter: Service and Repair

Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Filter Replacement

1. Remove the intake manifold cover.

2. Disconnect the rocker arm oil control solenoid (VTEC solenoid valve) 2P connector (A) and the EOP sensor 3P connector (B).
3. Remove the rocker arm oil control solenoid (VTEC solenoid valve) assembly (C) from the rear bank cylinder head, and check the rocker arm oil

control solenoid (VTEC solenoid valve) filter (D) for clogging. If it is clogged, replace the solenoid valve filter, the engine oil filter, and the
engine oil.

4. Install the rocker arm oil control solenoid (VTEC solenoid valve) assembly in the reverse order of removal.

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Filter
Component Information
Service and Repair

Variable Valve Timing Pressure Switch > < Timing Cover|Specifications

Honda Workshop Service and Repair Manuals

Pilot 2WD V6-3.5L (2006)

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Filter Component Information Service and Repair

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Filter Component Information Service and Repair

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Filter
Component Information
Service and Repair

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Filter
Component Information
Service and Repair