Pilot 2WD V6-3.5L (2006)
8. Remove the water passage (A) and connecting pipe (B).
9. Remove the EGR valve (A), ECT sensor 1 (B), ECT sensor 2 (C), thermostat cover (D), and thermostat (E).
10. Install the new rubber seal (F) onto the thermostat, then install the thermostat with pin (G) up, and install the thermostat cover.
11. Install the ECT sensor 1 and ECT sensor 2, using the new O-rings (H).
12. Install the EGR valve, using a new gasket (I).
13. Install the connecting pipe (A) and water passage (B), using the new O-rings (C) and new gaskets (D).
