Pilot 2WD V6-3.5L (2006)
21. Measure the voltage between the No. 1 terminal of the rear blower motor relay 4P connector and body ground.
Is there battery voltage?
YES - Go to step 22.
NO - Repair open in the wire between the No. 55 fuse in the under-hood fuse/relay box and the rear blower motor relay.
22. Turn the ignition switch ON (II).
23. Measure the voltage between the No. 2 terminal of the rear blower motor relay 4P connector and body ground.
Is there battery voltage?
YES - Go to step 24.
NO - Repair open in the wire between the No. 3 fuse in the driver's under-dash fuse/relay box and the rear blower motor relay.
24. Turn the ignition switch OFF.
25. Check for continuity between the No. 4 terminal of the rear blower motor relay 4P connector and body ground.
Is there continuity?
YES - Repair open in the wire between the rear blower motor relay and the rear blower motor.
NO - Check for an open in the wire between the rear blower motor relay and body ground. If the wire is OK, check for poor ground at G501.
