Pilot 2WD V6-3.5L (2006)
6. Connect the No. 1 and No. 2 terminals of the A/C compressor clutch relay 4P socket with a jumper wire.
Does the A/C compressor clutch click?
YES - Go to step 7.
NO - Go to step 19.
7. Disconnect the jumper wire.
8. Turn the ignition switch ON (II).
9. Measure the voltage between the No. 4 terminal of the A/C compressor clutch relay 4P socket and body ground.
Is there battery voltage?
YES - Go to step 10.
NO - Repair open in the wire between the No. 3 fuse in the driver's under-dash fuse/relay box and the A/C compressor clutch relay.
10. Turn the ignition switch OFF.
11. Reinstall the A/C compressor clutch relay.
12. Make sure the A/C switch is OFF.
13. Disconnect PCM connector A (44P).
14. Connect PCM connector A (44P) terminal No. 14 to body ground with a jumper wire.
15. Turn the ignition switch ON (II).
