Pilot 2WD V6-3.5L (2006)
Condenser HVAC: Service and Repair
A/C Condenser Replacement
1. Recover the refrigerant with a recovery/recycling/charging station.
2. Remove the front bulkhead cover, and the hood latch.
3. Remove the bolts and the radiator upper brackets.
4. Remove the bolts and screw, then disconnect the discharge line (A) and receiver line (B) from the A/C condenser. Plug or cap the lines
immediately after disconnecting them to avoid moisture and dust contamination.
5. Remove the bolts, then remove the A/C condenser by lifting it up. Be careful not to damage the radiator or the A/C condenser fins when removing
