Pilot 2WD V6-3.5L (2006)
9. Remove the mounting bolts and the heater unit.
10. Remove the self-tapping screws and the clamp (A), then carefully pull out the heater core (B) so you don't bend the inlet and outlet pipes.
11. Install the heater core in the reverse order of removal.
12. Install the heater unit in the reverse order of removal, and note these items:
-
Do not interchange the inlet and outlet heater hoses, and install the hose clamps securely.
-
Refill the cooling system with engine coolant.
-
Adjust the heater valve cable.
-
Make sure that there is no coolant leakage.
-
Make sure that there is no air leakage.
-
For evaporator and A/C-related information, refer to evaporator removal and installation.
-
Do the power window control unit resetting procedure.
-
Enter the anti-theft codes for the radio and the navigation system, then enter the audio presets.
