Pilot 2WD V6-3.5L (2006)
3. Install the A/C line clamp (A) on the lower replacement A/C line. Slide the bracket onto its A/C line bracket (B), but do not install the screw yet.
4. Install the A/C line clamp (A) on the lower replacement A/C line. Slide the bracket onto the its A/C line bracket, but do not install the screw yet.
5. Apply a few drops of refrigerant oil to the connections, then connect the lower lines (A) to the rear evaporator lines (B). Do not tighten the
connections yet.
6. Install the screw in the A/C line clamp (above the steering gearbox) on the lower A/C lines.
7. Install the screw in the A/C line clamp (next to the steering rack) on the lower A/C lines.
8. Tighten the lower A/C lines at the rear evaporator connections.
