Pilot 2WD V6-3.5L (2006)
9. Apply a few drops of refrigerant oil to the connections, then connect the rear A/C suction line (A) and receiver line (B) to the front evaporator
lines. Do not tighten the connections yet.
10. Install the screws into the two A/C line clamps (A) along the engine compartment bulkhead.
11. Tighten the upper-A/C-line-to-front-evaporator connections.
12. Tighten the upper-to-lower A/C line connections.
13. Add refrigerant oil.
14. Charge the system.
15. Reinstall the left front wheel.