Pilot 2WD V6-3.5L (2006)
Codes and what service should be performed, refer to Indicator Based Service. See: Maintenance/Service Intervals/Condition/Indicator Based
Maintenance Services/Indicator Based Service
When the remaining engine oil life is 5 to 1 percent, you will see a "SERVICE OIL LIFE" message along with the same maintenance item code(s), every
time you turn the ignition switch to the ON (II) position.
When the remaining engine oil life is 0 percent, the engine oil life indicator will blink. The display comes on every time you turn the ignition switch to
the ON (II) position. When this message appears, the indicated maintenance should be performed.
If the indicated maintenance is still not performed, you will see a negative mileage. It is displayed when you drive over 10 miles (for U.S. models) or 10
km (for Canadian models) after seeing the 0 percent message. Afterward, it shows the additional driving distance. The indicated maintenance should be
immediately performed.
The maximum total mileage shown is "_9999".
You can change the information display from the engine oil life display to the odometer, the trip meter, or the outside temperature (if equipped) every
time you press and release the Select/Reset knob.
When the engine oil life is 0 percent or negative mileage, the maintenance minder indicator remains on even if you change the information display.
The service should be performed immediately, and make sure to reset the display. For information on how to reset the display, refer to the article under
Resetting the Maintenance Minder. See: Service and Repair
Maintenance Main Items and Sub Items
