honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Malfunction Indicator Lamp|Description and Operation|Page 8588 > < Malfunction Indicator Lamp|Description and Operation|Page 8586
Page 5
background image

Is there continuity?

YES - Go to step 36.

NO - Replace the No. 1 FUEL PUMP (15 A) fuse, and update the PCM if it does not have the latest software, or substitute a known-good PCM,
then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.

36. Remove PGM-FI main relay 2 (FUEL PUMP) (A).

37. Check for continuity between PCM connector terminal B37 and body ground.

Is there continuity?

YES - Repair short in the wire between the No. 1 FUEL PUMP (15 A) fuse and the PCM (B37), or between the No. 1 FUEL PUMP (15 A) fuse
and PGM-FI main relay 2 (FUEL PUMP). Also replace the No. 1 FUEL PUMP (15 A) fuse.

NO - Go to step 38.

38. Remove the driver's side second row seat.
39. Remove the access panel from the floor.
40. Disconnect the fuel pump 5P connector.

41. Check for continuity between fuel pump 5P connector terminal No. 5 and body ground.

Is there continuity?

Malfunction Indicator Lamp|Description and Operation|Page 8588 > < Malfunction Indicator Lamp|Description and Operation|Page 8586