Pilot 2WD V6-3.5L (2006)
Vanity Lamp: Service and Repair
Vanity Mirror Light Replacement
1. Open the sunvisor.
2. Remove the sunvisor.
3. Disconnect the 2P connector (A) from the vanity mirror light.
4. Check for continuity between the No. 1 and No. 2 terminals.
-
With the vanity mirror cover (B) opened, there should be continuity.
-
With the vanity mirror cover closed, there should be no continuity.
5. If the continuity is not as specified, check the bulbs. If the bulbs are OK, replace the sunvisor.
