Pilot 2WD V6-3.5L (2006)
YES - Repair short in the wire between the fuel pump and PGM-FI main relay 2 (FUEL PUMP). Also replace the No. 1 FUEL PUMP (15 A) fuse.
NO - Go to step 42.
42. Reinstall PGM-FI main relay 2 (FUEL PUMP) (A).
43. Check for continuity between fuel pump 5P connector terminal No. 5 and body ground.
Is there continuity?
YES - Replace PGM-FI main relay 2 (FUEL PUMP). Also replace the No. 1 FUEL PUMP (15 A) fuse.
NO - Check the fuel pump, and replace it if necessary. Also replace the No. 1 FUEL PUMP (15 A) fuse.
44. Jump the SCS line with the HDS.
45. Disconnect PCM connectors A (44P) and B (44P).
46. Turn the ignition switch ON (II).
47. Measure voltage between PCM connector terminal B37 and body ground.
Is there battery voltage?
YES - Go to step 48.