Pilot 2WD V6-3.5L (2006)
transmission in 2 position.
4. Repeat step 2 and 3 several times.
5. Turn the ignition switch OFF.
6. Turn the ignition switch ON (II), and Wait for 30 seconds. The CKP pattern learn procedure is complete.
How to End a Troubleshooting Session (required after any troubleshooting)
1. Reset the PCM with the HDS.
2. Do the PCM idle learn procedure.
3. Turn the ignition switch OFF.
4. Disconnect the HDS from the DLC.
NOTE: The PCM is part of the immobilizer system. If you replace the PCM; it will have a different immobilizer code. In order for the-engine to
start, you must rewrite the immobilizer code with the HDS.
