Pilot 2WD V6-3.5L (2006)
8. Check for voltage between the A24 terminal of the driver's under-dash fuse/relay box socket and body ground.
Is there battery voltage?
YES - Go to step 9.
NO - Replace the driver's under-dash fuse/relay box.
9. Turn the ignition switch ON (II).
10. Check for voltage between A12 terminal of the driver's under-dash fuse/relay box socket and body ground.
Is there battery voltage?
YES - Go to step 11.
NO - Repair an open in the wire between No. 13 (7.5 A) fuse in the passenger's under-dash fuse/relay box and driver's under-dash fuse/relay box
socket.
11. Check for continuity between A14 terminal of the driver's under-dash fuse/relay box socket and body ground.
Is there continuity?
YES - Go to step 12.
NO - Repair an open in the wire between driver's multiplex control unit connector and body ground. If the wire is OK, check for poor ground at
G401.