Pilot 2WD V6-3.5L (2006)
Variable Valve Timing Solenoid: Testing and Inspection
Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Test
1. Disconnect the rocker arm oil control solenoid (VTEC solenoid valve) connector.
2. Measure resistance between the rocker arm oil control solenoid (VTEC solenoid valve) 1P connector terminal (A) and body ground.
-
If the resistance is as specified, go to step 3.
-
If the resistance is not as specified, replace the rocker arm oil control solenoid (VTEC solenoid valve).
3. Remove the rocker arm oil control solenoid (VTEC solenoid valve)/oil filter assembly (A) from the oil pump, and check the rocker arm oil control
solenoid (VTEC solenoid valve) filter (B) for a restriction. If there is a restriction, replace the rocker arm oil control solenoid (VTEC solenoid
valve) filter, the engine oil filter, and the engine oil.
