Pilot 2WD V6-3.5L (2006)
Fuel Pressure Regulator: Service and Repair
Fuel Pressure Regulator Replacement
1. Remove the fuel tank unit.
2. Remove the clip (A).
3. Remove the fuel pressure regulator (B).
4. Install the regulator in the reverse order of removal with new O-rings (C).
NOTE:
-
Coat the O-ring with clean engine oil.
-
Apply the engine oil to the O-ring, and install the pressure regulator with care not to pinch the O-ring. Never apply the brake fluid, vegetable
oil or alcohol-based oil to the O-ring.